8-10 T/H Vertical Mill
8-10 T/H is a small capacity requirement for the powder production, 8-10 T/H
Vertical Mill is for the ultrafine powder production, Clirik have different types for different capacity and finish size.
Vertical Mill is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite,
fluorite,
rock phosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.
Capacity data of Vertical Mill:
Model |
HGM80 |
HGM90 |
HGM100 |
HGM100A |
HGM125 |
Ring Diameter(mm) |
800 |
930 |
1035 |
1035 |
1300 |
Ring Number (PCS) |
3 |
3-4 |
3 |
4 |
4 |
Roller Number(PCS) |
21 |
24-32 |
27 |
34-36 |
40-44 |
Main Shaft Speed (r. p. min) |
230-240 |
200-220 |
180-200 |
180-200 |
135-155 |
Input Size (mm) |
≤20 |
Finished Size (um) |
5-47(325-2500) |
Capacity (t/h) |
0.5-4.5 |
0.6-6.5 |
0.7-7 |
1-8.5 |
1.5-12 |
Outlet Size L*W*H (m) |
13.9*4*6.2 |
14.7*4.8*7.2 |
18*4.6*8.6 |
18*4.6*8.6 |
14*9*10.25 |
Motor powder (KW) |
145-165 |
185-204 |
263 |
263-290 |
380-430 |